Duration: 5 Days / 4 Nights
Level: Basic/Intermediate (PD)
Nevado Chumpe is also known as Jatunriti which means “big ice mountain” in Quechua. Piero Ghiglione called it Yanaloma on the first ascent in 1955. It is a large, broad mountain on the northern side of the Cordillera Vilcanota range. The third highest peak in Cusco after Ausangate and Salkantay. You will gain good glacier travel experience on this mountain. Close to the summit we have a bit of steeper climbing over a crevasse. This mountain is easier than Ausangate making it the perfect option for you to get above 6,000 meters (20,000ft).
- Trip Outline
- Trip Includes
- Trip Excludes
No details found.
Cusco (3,400mts) – Base Camp Mullucocha (4,600mts)
We take a shuttle to the town of Tinki, 3 hours to the SE of Cusco. There we will have lunch and then take a taxi to the trail head. From there it is a 5 hour walk to base camp.
Base Camp – Advance Base Camp (5,300mts)
The hike from Base camp to Camp 1 is about 5-7 hours total. There is horse access, so no porting!
ABC – Summit (6,110mts) – ABC
We will leave at 1am. The climb is about 7-9 hours to the summit, then a descent of about 5 back to ABC.
ABC - Base Camp
We leave advance base camp and cross the moraine until we arrive back at base camp in about 5 hours.
Base Camp - Cusco
We will hike out 5 hours to the trailhead where a taxi will take us down to Tinki. Then we take our car back to Cusco.
- All group camping equipment
- Climbing equipment
- 1 High Mountain Guide per 3 clients
- Arriero and horse service (will carry all expedition gear)
- Food from Lunch Day 1 until Breakfast Day 5.
- clothing for cold and rain
- hiking boots or trail shoes
- mountaineering boots (we have them for rent also!)
- sleeping bag (0F/-18C)
- air mattress
- backpack 40-70 liters
- daypack 20-30 liters
- duffel bag
The best time for mountain climbing in Peru is the South American winter; April to September, with the driest months being June and July. Early in the season there is more accumulated snow left over from the rainy season, by August the glaciers are usually quite dry and more crevasses will have opened up. These conditions can affect route conditions over the season, for example: the normal routes on some mountains like Huascaran or Chopicalqui can be impassable late in the season due to a large crevasse that has opened up. In my experience the best time to climb your project peak is July 15th to August 15th.
It is very important to acclimatize properly. If you are just arriving to Cusco, I recommend at least 3 full nights in Cusco (3,300mts/10,824ft) before sleeping higher than 4,000mts (13,120ft). It is recommendable to climb a peak of 5,500 meters, before a 6,000 meter peak if you have the time. If you are already well acclimated, it is possible to go directly to climb an easier 6,000mts peak like Ausangate, Chumpe or Yayamari. These guidelines should be regarded as the minimums. Often people have a tight schedule and want to do as much as possible with their time, but acclimatization is important for you to be able to accomplish your goals.
Temperatures in the mountains of Peru can vary greatly depending on weather conditions. Above 4,000 meters in altitude, If the sun is out and there is no wind, it can be up to 65F (18C) during the day. At night during clear weather it can get down to 23F (-5C). Above 5,000 meters in altitude at the moraine camp (5,500m) of Ausangate it can get down to 14F (-10C) during the night. Above 6,000m it can get down to -4F (-20C) and even colder when you factor in the windchill.
There is much more solar radiation at altitude in Peru, Ecuador and Bolivia than other places because they are tropical ranges. It is very important to protect your skin and eyes from these conditions so that you don’t go snow blind after climbing. Anyone who climbs in the Andes needs good sunglasses and we suggest to have a brimmed hat and plenty of sunscreen, even for your lips.
It is important to have your layer system dialed in so you can climb fast while not getting overheated. Everyone feels the cold and conditions differently but I will give you the example of my own system. Lower body - 3 layer system: - Base layer: Thermal tights - Mid layer: Alpaca wool pants or down pants - Outer Shell: Waterproof pants (goretex or similar) Upper body - 4 layer system: - Base Layer: Under armour cold gear long sleeve shirt - Light Mid layer: Synthetic down hoodie - Heavy Mid Layer: 700+ fill Down jacket - Outer Shell: Waterproof jacket with hood that can go over helmet (goretex or similar)
The most important pieces of clothing/gear for mountaineering are where your body makes contact with the mountain: gloves and boots. I would recommend single boots like the Scarpa Mont Blanc or La Sportiva Nepal Evo or similar boots for peaks that are 5,000 meters up to a peak like Tocllaraju (6,034m) that just goes over 6,000m. For anything higher like Ausangate (6,384m) or Huascaran (6,770m) double boots are best for most people but not absolutely necessary. I personally use the Scarpa Phantom 6,000, because Scarpa boots have a wider toe box for my wide feet than La Sportiva boots. But there are good La Sportiva models also like the Spantik or the G2 SM. As with all mountaineering boots, buy them a size larger so you have room for an extra sock or wiggle room to keep the circulation going.