- Trip Outline
- Trip Includes
- Trip Excludes
If you have not climbed a mountain before, Soray peak is a perfect if you are using crampons for the first time. On the summit you have spectacular views of the surrounding valleys and mountains including Salkantay and Humantay. You can combine it with the Salkantay Trek to Machu Picchu. Or you can climb it as an acclimatization peak before attempting Salkantay.
No details found.
Cusco – Soray Pampa (3,888m)
We leave Cusco in the morning in an express van and arrive to Mollepata after about 2 hours. Here we will stop, eat breakfast and buy any last minute necessities. Then we will continue on for another hour or so to Soray Pampa at the base of the high mountains. Here we will acclimatize and stay the night in cabins.
Soray Pampa – Base Camp (4,924m)
After breakfast we go up to Base Camp. This should take about 4 hours and cover a distance of around 4km as we gain over 900m in altitude. We will have time to relax and acclimatize more in the afternoon.
Base Camp – Summit (5,446m=17,863ft) – Soray Pampa – Cusco
We awake at 3am, make a quick breakfast and leave the tent at 4am. The climb should take 4-5 hours. The descent to Base Camp will be about 3 hours. We will pack up our camp and go down to Soray Pampa arriving between noon and 1pm. From here we can either return to Cusco this same day or if you combine this climb with a trek to Machu Picchu, you will rest and stay the night in Soray Pampa. The next day we will start trekking to Machu Picchu.
- Expedition & Climbing Equipment (Tents, Crampons, Ice Axe, Harness, Helmet, etc.)
- Food (Lunch Day 1 to Lunch Day 3)
- 1 High Mountain Guide per 3 clients
- Porter / Cook
- clothing for cold and rain
- waterproof hiking boots
- sleeping bag (20F/-6C)
- air mattress
- backpack 40-70 liters
The best time for mountain climbing in Peru is the South American winter; April to September, with the driest months being June and July. Early in the season there is more accumulated snow left over from the rainy season, by August the glaciers are usually quite dry and more crevasses will have opened up. These conditions can affect route conditions over the season, for example: the normal routes on some mountains like Huascaran or Chopicalqui can be impassable late in the season due to a large crevasse that has opened up. In my experience the best time to climb your project peak is July 15th to August 15th.
It is very important to acclimatize properly. If you are just arriving to Cusco, I recommend at least 3 full nights in Cusco (3,300mts/10,824ft) before sleeping higher than 4,000mts (13,120ft).
It is recommendable to climb a peak of 5,500 meters, before a 6,000 meter peak if you have the time. If you are already well acclimated, it is possible to go directly to climb an easier 6,000mts peak like Ausangate, Chumpe or Yayamari. These guidelines should be regarded as the minimums. Often people have a tight schedule and want to do as much as possible with their time, but acclimatization is important for you to be able to accomplish your goals.
Temperatures in the mountains during the day can vary greatly depending on weather conditions. Above 4,000 meters in altitude, If the sun is out and there is no wind, it can be up to 65F (18C) during the day. At night during clear weather it can get down to 23F (-5C).
Above 5,000 meters in altitude, for example at the moraine camp (5,500m) of Ausangate it can get down to 14F (-10C) during the night. Above 6,000m it can get down to -4F (-20C) and even colder when you factor in the windchill.
There is much more solar radiation at altitude in Peru, Ecuador and Bolivia than other places because they are tropical ranges. It is very important to protect your skin and eyes from these conditions so that you don’t go snow blind after climbing. Anyone who climbs in the Andes needs good sunglasses and we suggest to have a brimmed hat and plenty of sunscreen, even for your lips.
It is important to have your layer system dialed in so you can climb fast while not getting overheated. Everyone feels the cold and conditions differently but I will give you the example of my own system.
Lower body - 3 layer system:
- Base layer: Thermal tights
- Mid layer: Alpaca wool pants or down pants
- Outer Shell: Waterproof pants (goretex or similar)
Upper body - 4 layer system:
- Base Layer: Under armour cold gear long sleeve shirt
- Light Mid layer: Synthetic down hoodie
- Heavy Mid Layer: 700+ fill Down jacket
- Outer Shell: Waterproof jacket with hood that can go over
helmet(goretex or similar)
Any waterproof boots, Goretex or similar are fine for hiking in the Andes, just be conscious of weight, as always with altitude every gram will cost you. My favorite brand of trekking boots is Asolo, especially the models with a rand that goes all the way around the sides of the boot. This eliminates the stitching that can pop if you hit the corners of your feet on rocks while hiking.